|Posted on September 29, 2011 at 9:35 PM||comments (0)|
I have a question about the distribitor that came with my tudor (original one to car probly). I has a crack in the bottom shaft. Is this usable as is? If I remeber right it sits in the engine and doesn't stick out inside the engine.
Any info would be greatly appreciated!
Thanks in advance!
|Posted on September 28, 2011 at 8:35 PM||comments (0)|
Today I got the engine into the chassis. I have a few more things to paint before I can drive the chassis around to test it. I still have to adjust the new brake rods, and paint the rear backing plates and drums.
|Posted on September 24, 2011 at 9:15 PM||comments (0)|
Got the chassis pretty much a roller. Front and rear end are now in. I need to finish restoring the rear backing plates and a few other misc. parts then the chassis is ready to get the motor. Hope to be test driving the car in the next week or so. I uploaded a bunch of pictures of my progress. Please leave me some comments and suggestions.
Thanks for reading and checking out my site!
PS: Thanks to:
My dad- Ron
My girlfriend- Lisa
& My Friend Brandon
for helping me assembly the chassis!
|Posted on September 7, 2011 at 6:30 PM||comments (0)|
This past Saturday my dad and I took a ride up to a fellow clubmember's house. He had told me he would help me rebuild my rear end when I had the parts and everything ready. he also helped me with a lot of other little things. i have posted pictures in the project gallery.
Here is the link to the album: Day at Mike Smith's
Thanks to Mike Smith (MARCOM Member) for helping me with the tudor restoration!!!
September 7th, 2011